codeberg-forgejo/docs/content/administration/fail2ban-setup.en-us.md

date	title	slug	sidebar_position	toc	draft	aliases	menu
2018-05-11T11:00:00+02:00	Fail2ban Setup	fail2ban-setup	16	false	false	/en-us/fail2ban-setup	sidebar parent name sidebar_position identifier administration Fail2ban setup 16 fail2ban-setup

Fail2ban setup to block users after failed login attempts

Remember that fail2ban is powerful and can cause lots of issues if you do it incorrectly, so make sure to test this before relying on it so you don't lock yourself out.

Gitea returns an HTTP 200 for bad logins in the web logs, but if you have logging options on in app.ini, then you should be able to go off of log/gitea.log, which gives you something like this on a bad authentication from the web or CLI using SSH or HTTP respectively:

2018/04/26 18:15:54 [I] Failed authentication attempt for user from xxx.xxx.xxx.xxx

2020/10/15 16:05:09 modules/ssh/ssh.go:143:publicKeyHandler() [W] Failed authentication attempt from xxx.xxx.xxx.xxx

(DEPRECATED: This may be a false positive as the user may still go on to correctly authenticate.)

2020/10/15 16:05:09 modules/ssh/ssh.go:155:publicKeyHandler() [W] Failed authentication attempt from xxx.xxx.xxx.xxx

(DEPRECATED: This may be a false positive as the user may still go on to correctly authenticate.)

2020/10/15 16:05:09 modules/ssh/ssh.go:198:publicKeyHandler() [W] Failed authentication attempt from xxx.xxx.xxx.xxx

(DEPRECATED: This may be a false positive as the user may still go on to correctly authenticate.)

2020/10/15 16:05:09 modules/ssh/ssh.go:213:publicKeyHandler() [W] Failed authentication attempt from xxx.xxx.xxx.xxx

(DEPRECATED: This may be a false positive as the user may still go on to correctly authenticate.)

2020/10/15 16:05:09 modules/ssh/ssh.go:227:publicKeyHandler() [W] Failed authentication attempt from xxx.xxx.xxx.xxx

(DEPRECATED: This may be a false positive as the user may still go on to correctly authenticate.)

2020/10/15 16:05:09 modules/ssh/ssh.go:249:sshConnectionFailed() [W] Failed authentication attempt from xxx.xxx.xxx.xxx

(From 1.15 this new message will available and doesn't have any of the false positive results that above messages from publicKeyHandler do. This will only be logged if the user has completely failed authentication.)

2020/10/15 16:08:44 ...s/context/context.go:204:HandleText() [E] invalid credentials from xxx.xxx.xxx.xxx

Add our filter in /etc/fail2ban/filter.d/gitea.conf:

# gitea.conf
[Definition]
failregex =  .*(Failed authentication attempt|invalid credentials|Attempted access of unknown user).* from <HOST>
ignoreregex =

Add our jail in /etc/fail2ban/jail.d/gitea.conf:

[gitea]
enabled = true
filter = gitea
logpath = /var/lib/gitea/log/gitea.log
maxretry = 10
findtime = 3600
bantime = 900
action = iptables-allports

If you're using Docker, you'll also need to add an additional jail to handle the FORWARD chain in iptables. Configure it in /etc/fail2ban/jail.d/gitea-docker.conf:

[gitea-docker]
enabled = true
filter = gitea
logpath = /var/lib/gitea/log/gitea.log
maxretry = 10
findtime = 3600
bantime = 900
action = iptables-allports[chain="FORWARD"]

Then simply run service fail2ban restart to apply your changes. You can check to see if fail2ban has accepted your configuration using service fail2ban status.

Make sure and read up on fail2ban and configure it to your needs, this bans someone for 15 minutes (from all ports) when they fail authentication 10 times in an hour.

If you run Gitea behind a reverse proxy with Nginx (for example with Docker), you need to add this to your Nginx configuration so that IPs don't show up as 127.0.0.1:

proxy_set_header X-Real-IP $remote_addr;

The security options in app.ini need to be adjusted to allow the interpretation of the headers as well as the list of IP addresses and networks that describe trusted proxy servers (See the configuration cheat sheet for more information).

REVERSE_PROXY_LIMIT = 1
REVERSE_PROXY_TRUSTED_PROXIES = 127.0.0.1/8 ; 172.17.0.0/16 for the docker default network